New vs Refurbished ICs: Which Grade to Buy?
Quick answer
Choose New for most repair jobs and bench stock: these chips are brand-new and have never been soldered or installed. Choose Refurbished as a lower-cost option on the parts that offer it, where pulled, cleaned and re-balled chips fit your repair budget. Always verify markings and take measurements before heating, because soldered chips cannot be returned.
What each grade means
When you order replacement ICs for board repair, the grade you pick affects your bench time and your rework rate. At ICMend, every chip is sold in one of two grades, based on where it comes from and its condition.
NEW chips are brand-new and have never been soldered or installed. They are marked with the part number only. A small number of defects within a batch is possible.
REFURBISHED chips are pulled from used phone boards, then cleaned, re-balled and repacked. Refurbished is offered on some parts only, as a lower-cost alternative to New.
Both grades are sold in packs of 5, 10 or 20. The price per chip drops as the pack grows, so you can keep the parts you replace every week on hand.
Side-by-side comparison
| New | Refurbished | |
|---|---|---|
| Source | Brand-new, never soldered or installed | Pulled from used phone boards |
| Condition | New; a small defect rate within a batch is possible | Cleaned, re-balled and repacked |
| Availability | Every part in the catalog | Selected parts only |
| Best for | Customer repairs and everyday bench stock | A lower-cost option on the parts that offer it |
Which grade to choose
For most board repairs and for stocking your bench, choose New. Buying packs of 10 or 20 lowers the price per chip on the parts you use every week. Because a small defect rate within a batch is possible, check each chip before you mount it.
Choose Refurbished when you want a lower-cost option and the part offers one. Refurbished is currently available for 1612A1, 1610A1, 1610A3, 610A3C, 343S00511, 343S00355, 343S0583, 343S0694, 338S00942 and 338S00105. Every other part is sold as New only.
Test before you solder
Heat changes a chip permanently. Once a chip has been heated or soldered, it can no longer be returned.

Before turning on your hot air wand or soldering iron, run through this inspection process:
- Visual inspection: Place the chip under your microscope. Check the laser marking on the package against your schematic. Confirm pin 1 orientation dots.
- Ball and pad condition: Verify that solder balls are uniform in height and shape, with no bridging, missing spheres, or pad oxidation.
- Electrical validation: Where test fixtures or exposed test points allow, take diode-mode and resistance measurements before committing the component to the board.
Test before you solder — soldered chips can't be returned
Under our store policy, chips that have been soldered, tinned, re-balled, or heated cannot be returned or exchanged under any circumstances. If an item arrives dead on arrival, damaged in transit, or incorrect, you must report it within 7 days of delivery with photos of the package and marking plus a short video or measurement. Read our Returns & Warranty Policy.
All ICMend orders ship from Shenzhen within 1–3 business days. US customers can choose Economy Tracked (7–15 days, $4.95, free over $59) or Express by DHL, FedEx or UPS (5–7 business days, $12.95, free over $129); both US options include import duties. Taking three minutes to inspect your pack on arrival protects your money and keeps your bench running.
FAQ
Is every part offered in Refurbished?
No. Refurbished is offered only on the parts listed above. Every other part is sold as New only.
Can I return an IC if it does not solve my board issue after soldering?
No. Chips that have been soldered, tinned, heated, or re-balled are strictly non-returnable and non-exchangeable. Parts ordered by mistake are also not returnable. You must inspect and verify the chip within 7 days of delivery before applying heat.
How do pack sizes affect component pricing?
Every replacement IC on ICMend is sold in packs of 5, 10, or 20 units. As your pack quantity increases, the individual price per chip drops, allowing shops to reduce unit costs on high-volume repair items.
What should I do if a chip arrives dead on arrival or damaged?
If you receive a defective, transit-damaged, or incorrect item, notify us within 7 days of delivery via our contact page. Provide a clear photo of the packaging and chip marking, alongside a short video or measurement demonstrating the fault, and we will issue a replacement or refund.
Apple and Samsung names are used for compatibility only; ICMend is not affiliated with them.



