610A3B vs 1610A3 vs 1610A2 vs 1610A1: Tristar IC Compatibility Chart
You need to replace a Tristar chip (also called a U2 IC) on an iPhone or iPad, and the part you have on hand doesn't match the marking on the board. You want to know if you can use it anyway.
Quick answer
Yes, but one way only. A newer revision can replace an older one. Don't install an older revision on a device that came with a newer one.
Tristar compatibility chart
Revisions from oldest to newest: 1610A1 → 1610A2 → 1610A3 → 610A3B.
| Original IC on the board | Can install | Do not install |
|---|---|---|
| 1610A1 | 1610A1, 1610A2, 1610A3 | 1608A1 |
| 1610A2 | 1610A2, 1610A3 | 1610A1, 1608A1 |
| 1610A3 | 1610A3 | 1610A1, 1610A2, 1608A1 |
| 610A3B (iPhone 7 / 7 Plus) | 610A3B | 1610A1, 1610A2, 1610A3, 1608A1 |
| 1608A1 | 1608A1 | Any other part |
| 610A3C | 610A3C | Any other part |
- On iPhones, 610A3B can also replace 1610A1, 1610A2 and 1610A3.
- On iPads, pick within the 1610 series using the chart above. Don't use 610A3B.
- iPhone 8 and later use 1612A1 (Hydra IC), which is not interchangeable with any of the chips above.
One rule to remember: newer revisions are backwards compatible.
By model: which iPhone charging IC to order

| Model | Original IC | Board designator | Also fits |
|---|---|---|---|
| iPhone 6 / 6 Plus | 1610A2 | U1700 | 1610A3, 610A3B |
| iPhone 6S / 6S Plus / SE (2016) | 1610A3 | U4500 | 610A3B |
| iPhone 7 / 7 Plus | 610A3B | U4001 | None, use 610A3B only |
| iPhone 8 and later | 1612A1 and later parts | — | Not on this chart |
For an iPad charging IC (iPad Tristar):
| Model | Can install |
|---|---|
| iPad 4, iPad mini (1st gen) | 1608A1 only |
| iPad Air, iPad mini 2, iPad mini 3 | 1610A1, 1610A2, 1610A3 |
| iPad Air 2 | 1610A2, 1610A3 |
| iPad mini 4 | 1610A3 |
| iPad 5 / 6 / 7 / 8, iPad Pro 9.7 / 10.5 / 12.9 (1st, 2nd gen) | 610A3B |
| iPad Pro 12.9 (3rd gen), iPad Pro 11 (1st gen) | 610A3C |
Original part numbers and board designators follow our product pages.
FAQ
610A3B vs 1610A3: can 610A3B replace 1610A3?
Yes. 610A3B is backwards compatible with 1610A3, 1610A2 and 1610A1, so it can replace any 1610 chip.
Can 1610A3 replace 1610A2 and 1610A1?
Yes. 1610A3 can replace both 1610A1 and 1610A2.
Can 1610A1 go on an iPhone 6 or 6S?
No. An iPhone 6 needs 1610A2 or newer, and an iPhone 6S needs 1610A3 or 610A3B. 1610A1 cannot go on a device that originally used 1610A2 or 1610A3.
iPhone 7 charging IC: can an iPhone 7 use 1610A3?
No, don't use it. 1610A3 is one generation older than 610A3B, and there are cases where the phone still didn't charge after it was installed on an iPhone 7. Order 610A3B for both the iPhone 7 and 7 Plus and fix it the first time.
What is 1610A3B?
It's 610A3B. The marking on the chip reads 610A3B. There is no 1610A3B part number, although many seller listings write it that way. Look for 610A3B when you order.
Is 1608A1 interchangeable with any of the others?
No. The iPhone 5, iPad 4 and 1st-gen iPad mini can only use 1608A1.
If I only want to stock one part, which one?
Stock 610A3B for iPhones and 1610A3 for iPads.
Still not working after the replacement? Check two things first
- Recheck your soldering first, then check whether the Trinity coil behind Tristar was damaged during desoldering.
- The fault isn't always Tristar. On an iPhone 7, for example, error 4013 on restore after the replacement can come from a shorted baseband CPU, not from Tristar.
Our recommendations
- Order the original part number whenever you have it. It's the least trouble.
- To stock fewer parts: keep 610A3B for iPhones, 1610A3 for iPads, and a few 1608A1 chips separately.
- Grades: 1608A1, 1610A2 and 610A3B come in New only. 1610A1, 1610A3 and 610A3C come in both New and Refurbished.
Images are illustrative; chips are shown enlarged. Logic board reference photo: Sonic8400 / Wikimedia Commons, CC BY-SA 4.0.
Apple and Samsung names are used for compatibility only; ICMend is not affiliated with them.